CARPRO CQUARTZ Gliss 2.0 Topcoat

CARPRO CQUARTZ Gliss 2.0 is a super-slick top coat for CQUARTZ and DQUARTZ coatings. It can also be used as a standalone coating. Its enhanced oleophobicity repels oils and contaminants, and CARPRO reports a water-contact angle above 110 degrees for water-spot protection. The formula is designed for a smooth finish and is safe on matte and satin paintwork.

Key features

• Improved slickness
• Increased durability
• Oleophobic surface that repels oils and contaminants
• Protection against water spots
• For use over CQUARTZ or DQUARTZ, or as a standalone coating
• Safe on matte and satin paintwork

How to apply

1. Prepare a clean, dry surface. Do not apply in direct sunlight or to a hot surface. Work in a ventilated area; use skin and respiratory protection and test on an inconspicuous area first.
2. Shake well. Slowly open the bottle and draw one or two lines of Gliss 2.0 onto a suede-wrapped applicator. A CARPRO microfiber applicator or cotton pads can also be used.
3. Allow 3-5 minutes to flash at 25 C, or 5-7 minutes at 15 C, then wipe off all excess with a microfiber towel.
4. If high spots remain for too long, reapply Gliss 2.0 and wipe off immediately.
5. Apply at least two layers, allowing one hour of drying time between layers. Keep the surface out of water for at least 24 hours.

Do not reuse 4-inch suede applicators or towels used to buff off the coating. Keep out of reach of children. Seller options: 30 ml, 50 ml and 100 ml.